Micropol Attenuator SCU

A fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself.

Our attenuators are GR 910 certified by Experior Laboratories (SC APC and LC UPC). The attenuator has been mechanical tested that includes 5,000-hour environmental tests. The solid body at the LC attenuator has a stronger design for greater mechanical strength. With a compact housing, the LC has reduced length and allows a wide range of usage including the existing PON Network.

Features:

SC and LC GR910 Certified
Dope fiber technology
Wide operating wave length (1270 ~ 1650)
Low back reflection
High durability over high power
One-piece housing construction including LC & MU for better side load performance
Metal-ion doped fiber (continuous)
Attenuation levels ranging from 1dB to 30dB

Connector gender	Fixed Male to Female	Return loss	≥55dB (UPC) ≥ 65dB (APC)
Attenuation	3dB	Transfer mode	Single-Mode
Attenuation Accuracy	±0.5dB	Operating Wavelength(nm)	1310 ± 40nm 1490 ± 20nm 1550 ± 40nm
Attenuation Tolerance	1 to 10dB : ±0.5 11 to 30dB : ±5% (for 3 wavelengths)	Max Optical Input Power	500mW
Operating Temp Range	-40°C - +75°C

Note: For full wavelength type (1270 ~ 1650) Attenuation tolerance will be 1db to 10db 0.7db and 11db to 30db ±10%.

Attenuator EN