PROCON JR Plug
Expanded beam connector, junior-size, plug with 1-4 channels. Built according to MIL-M83526/20 standard.
Contact us for more information
The PROCON connectors have the best optical performance on the market. This is achieved with Micropol’s lens technology, state of the art production and alignment process.
The PROCON expanded beam connector JR Plug is the only junior-sized connector in the world with a range from 1-4 fibers, that have approved beam size according to MIL-M83526/20 standard.
Features
- Built according to MIL-M83526/20 standard
- Advanced expanded beam technology
- Hermaphroditic interconnection
- 1 to 4 fiber channels single- or multi mode
- No adaptors needed
- Low downtime field repair
- Easy clean, no special tools
Optical
| Type | Single-mode (SM), Multi-mode (MM) or hybrid |
| Optional transmission | 10Gbit/s |
| Insertions loss (SM) | Typical insertion loss -1,0dB (1310 nm) Maximum insertion loss -1,5dB (1310 nm) |
| Insertion loss (MM) | Typical insertion loss -1,0dB (1300 nm) Maximum insertion loss -1,5dB (1300 nm) |
| Return loss (PDL) | >35dB at 1310nm or 1550nm. Polarization dependent loss less than 0,5 dB |
Mechanical
| Coupling type | Hermaphroditic |
| Compliant | ROHS & REACH |
| Material | Hard anodized aluminium |
| Alternative material | Marine bronze & stainless steel |
| Colour | Grey |
| Durability | 3000 mating cycles |
| Freefall | 500 falls from 1,2 meters height |
| Vibration | 5-500Hz, 0,75mm amplitude at 10G |
| Shaking | 390 m/S numbers of shakes 3x4000 |
| Shock pulse length | 11ms, half-sine at 35g. Numbers of axis: 3 (x, y, z) |
Environmental
| Operating temperature | -57°C to +85°C |
| Water immersion | IP67 |
| Air pressure | <25kPa -55°C during 4h |
| Corrosion resistance | 500h salt spray |
| Flammability | DOD-STD-1678, method 5010 |
Compatible with*:
- Fibreco Junior
- QPC Q- Mini
- Te Pro-Beam Junior
- Amphenol TacBeam
- Stratos HMA
How to clean the expanded beam connector?
This instruction covers the cleaning procedure for the expanded beam (EB) connectors and its optical interface (mating face, optical path lenses, EB insert and alignment features). These connectors are non-contacting; therefore, mating the connector without cleaning first typically will not cause permanent damage to the optic interface.
Quote & information request